2
Index
1. Delivery
and
warranty
4
1.1
Foreward
1.2 Keeping and using the manual
1.3
Warranty
1.4
Machine
description
1.5
Foreseen use
1.6
Forbidden
uses
1.7
Machine data
1.8
Protections and safety devices
1.9
Working
position
2. Technical features
15
2.1 Main parts
2.2 Technical features
2.3 Machine dimensions and weight
2.4 Noise level
2.5
Electrical
diagrams
2.5.1 220 V single-phase electrical diagram
2.5.2 380 V three-phase electrical diagram
3. Controls and indicators
19
3.1
List of controls and indicators
4. Testing, transport, delivery and installation
20
4.1
Testing
4.2 Delivery and moving the machine
4.3
Installation
4.3.1
Package
disposal
4.3.2 Moving the machine
4.4
Connecting the electrical system
4.4.1
Three-phase
machine
4.4.2 Single-phase machine
5.
Start up and stop
23
5.1 Checking the correct electrical connection
5.2 Checking the presence and efficiency of guards and safety devices
5.3
Checking the efficiency of the stop push button
5.4 Starting up the machine
5.5
Stopping the machine
6. Machine
use
25
6.1
Lubrication
6.2 Cleaning the machine
6.3
Putting the machine out of service
27
8 Now the propeller, blade, plate, and ring nut can be reassembled.
7 - Maintenance
ATTENTION!
All cleaning and maintenance operations must only be carried out with the
machine at a standstill and disconnected from the mains.
The area where maintenance operations are carried out must always be
kept clean and dry.
Do not allow unauthorized personnel to work on the machine.
All parts, including the utensil, must be replaced, if necessary, with original
spare parts from authorized dealers or directly from the manufacturer.
7.1 - Lubrication
The machine does not require any lubrication.
7.2 - Cleaning the machine
ATTENTION!
Disconnect the machine from the mains before cleaning it.
Do not clean the machine with jets of water.
Use only non-toxic detergents, which are expressly indicated for cleaning
components for foodstuff.
7.3 - Putting the machine out of service
The machine is made of materials such as aluminum, steel and copper,
therefore they do not require particular operations for scrapping.
Therefore, contact specific trash disposal companies and separate the
components according to their material.
