18
2.5 - Electrical diagrams
2.5.1 - Single-phase electrical diagram at 220V
2.5.2 - Three-phase electrical diagram at 380V
PINK
YELLOW
WHITE
GREEN
BROWN
GREY
PINK
YELLOW
WHITE
GREEN
BROWN
FUSE
BOND
(TENSION CHANGE)
ONE PHASE
LINE
ONE PHASE
TR
AC
TION
W
INDNG
STAR
T
W
INDNG
THERMIC
MICROSWITCH
STAR
T
CONDE
NS
E
R
TREE PHASE
LINE
BOND
(TENSION CHANGE)
FUSE
GREY
THERMIC
MICROSWITCH
11
1. Product outlet, with plate holes smaller than 8 mm.
In this case it is impossible to insert fingers inside the outlet.
Upon request from the client, exit plates with holes having a diameter
greater than 8 mm can be installed.
In this case the user will be responsible for installing the proper outlet
protection.
2. Hand guard.
The hopper in the TC 32 RIO model, has the rigidly welded protection
"2", Fig.1.8.1 pag. 13, in compliance with the circular from the Work
and Welfare Ministery n° 66 dated 05.09.79.
The smaller models do not need this protection due to the smaller sizes
of the loading inlet.
3. Stainless steel hopper is firmly blocked at the loading inlet (TC 32
RIO).
4. Electrical components protection carters.
The lower part of the machine is closed with a carter, blocking
involuntary access to electrical components inside of it.
5 - Blockage lever for ground meat outlet
- Lift the lever to enable disassembly of the outlet and related parts (see
sticker).
- Lower the lever to block the outlet in the working position, making sure
that it is positioned in the predisposed housing (see sticker).
ATTENTION!
Never tamper with the safety devices.
