Clas Ohlson YT62001, Manual

Page: 1 / 5

English
UNITED KINGDOM • customer service tel: 020 8247 9300 e-mail customerservice@clasohlson.co.uk
internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
Ver
. 20190603
A B
C E
D
F
Rechargeable USB Lighter
Art.no 44-7070 Model YT62001-Silver
44-7070-1 YT62001-Gold
44-7070-2 YT62001-Pink
44-7070-3 YT62001-Blue
Please read the entire instruction manual before using the product and
then save it for future reference. We reserve the right for any errors in
text or images and any necessary changes made to technical data.
In the event of technical problems or other queries, please contact our
Customer Services.
Safety
Product description
Warning.
The product is not a toy.
Keep it out of reach of children and pets.
Do not expose to temperatures exceeding 50 °C.
Do not pierce or burn.
• Never subject the product to heavy impacts, high humidity or wetting.
• Do not expose the product to naked flames or temperatures
over 50 °C (120 °F). Do not leave the product in the sun for
prolonged periods.
• Never touch the electrodes or the spark. Doing so could result in
an electric shock or burn injury.
• Never let the spark come into contact with people or animals.
• Keep the product a safe distance away from your face, skin,
clothing and combustible items.
• Never attempt to open, modify or repair the product.
• All repairs must be carried out by qualified service technicians using
genuine spare parts.
• Use only the included Micro-USB cable to charge the product.
A. LED battery status indicators:
3 LEDs lit = full capacity, 1 LED lit/
flashing = the battery needs charging.
B. Ignition switch
C. Lock release button
D. Nozzle
E. [ I/O ] Power switch: When switched
off the two ceramic electrodes can
be extended for cleaning without
generating a spark.
F. Micro-USB port
Charging
Connect the included charging lead to the Micro-USB port on
the lighter and to a computer or other USB charger with an output
voltage of 5 V (+/− 0.5 V). The LED indicators flash during charging and
remain off when the battery is fully charged. The LEDs will then show
the current charge status of the battery when the lighter is lit.
• Fully charge the product every second month if it is not to be used
for a long time. This will prolong the service life of the battery.
• Do not charge the lighter for longer than three hours (it takes
1–3 hours to fully charge the battery).
• Never leave the lighter on charge for longer than this as doing so
might shorten the service life of the battery.
• The lighter cannot be used while it is charging.
Instructions for use
Make sure that the spark in the nozzle has been extinguished before
you put the lighter down.
• It is completely normal for the lighter to make a buzzing noise
during use.
• If the lighter is not used for 10 seconds it will switch off automatically.
When you release the ignition switch, the lighter will be ready for
use again.
Care and maintenance
Always switch the lighter off using the power switch (E) before
cleaning it.
• Clean the product using a damp cloth. Use only mild cleaning
agents, never solvents or corrosive chemicals.
• Remove any soot, ash or wax from the nozzle of the lighter using
a dry cloth, brush or suitable cleaning implement. Never clean
the nozzle or electrodes using a cleaning implement made of metal,
as doing so may damage the electrodes.
• If the electrodes need to be cleaned, switch the lighter off using
the power switch (E), slide the electrodes forward using the ignition
switch and clean them carefully.
Responsible disposal
This symbol indicates that the product should not be
disposed of with general household waste. This applies
throughout the entire EU. In order to prevent any
harm to the environment or health hazards caused by
incorrect waste disposal, the product must be handed
in for recycling so that the material can be disposed
of in a responsible manner. When recycling your
product, take it to your local collection facility or contact
the place of purchase. They will ensure that the product
is disposed of in an environmentally sound manner.
Specifications
Size Length 190 mm, Ø 16 mm
Weight 50 g
1. Hold the lighter with the ignition
switch facing upwards and
the nozzle pointing forwards.
2. Hold in the lock release button (C).
3. Slide the ignition switch (B)
forwards and hold it there.
4. Place the spark/nozzle of
the lighter against the wick of
the candle to be lit.
5. As soon as the candle is lit, release
the ignition switch and move
the lighter away from the flame.