SIRE XROOM, Руководство по эксплуатации и установке

Страница: 7 / 50

-
In an environment with higher condensation humidity, such as: bathrooms, swimming pools, saunas,
etc.,
- The unit must not be installed just below the electrical socket or wiring box,
- The unit must not be installed in a position that could affect its proper functioning, or near the curtains
or other flammable materials.
- Neither the manufacturer nor the supplier is liable for damage caused by improper use of the units. The
user bears the risk.
4. Transport, Delivery Control, and Storage
1. Transport
- During transport, keep the product in the position indicated by the symbol on the packaging.
- The packaging must not be loaded with a weight higher than that permitted by the manufacturer.
- The packaging must not be exposed to ambient effects.
- The transport air temperature must range between -25 to 55 °C,
- The transport relative humidity must range between 10 % and 90 % non-condensing.
- Use adequate tools to prevent damage to the goods and damage to the health and safety of persons.
- In the case of further transport without original packaging or with changed original packaging, it must be
ensured that the equipment is optimally secured and protected against damage.
1.4.2. Delivery Inspection
- Before starting the installation and before unpacking the unit from the box, it is necessary to check for
any traces of damage on the packaging. If the packaging is damaged, write a record of the damage and
contact your carrier, please.
- Check if you have received the product actually ordered by you. After unpacking, check that the unit and
other components are in order. Please, report any discrepancy with the order to the supplier
immediately.
If an order complaint is not made immediately after delivery, it will not be considered later.
1.4.3. Storage
- If you do not plan to install the unit immediately after purchase, it must be stored in an indoor, non-
condensing environment at temperatures ranging b5 to +40 °C. If the product is transported at
temperatures below 0 °C, it must be put into the working environment where it will be installed for at
least 2 hours after unpacking.
1.5. Contents of the Package
1.5.1. Xroom 100
(XR1-010-EC…)
Box 1 – Xroom unit
7
Version 1 – GBR(23/06/2021) D-502-0152
- Xroom unit body with front metal cover
- installation template with assembly pins
1 pc
1 pc
- bolt M6x25 5 pc
- bolt M6x20 with a plastic head 2 pc
- Quick safety data sheet 1 pc
- serial plate 1 pc
Box 2 – mandatory installation accessories XR1-01-DUCT-1 (for installation into a wall with thickness of the
max. 500 mm)
-
plastic white tube
Ø
125 mm, length 500 mm 1 pc
- supply line assembly with damper
Ø
125 mm, length 500 mm 1 pc
- plastic square outlet with damper 1 pc
- plastic square outlet without damper 1 pc
- self-tapping bolt
Ø
4x22 4 pc
- insulation washer 170x170x5 with hole
Ø
127 mm 2 pc