SIRE XROOM, Руководство по эксплуатации и установке

Страница: 44 / 50

2. Filter Inserting
Pay attention to the correct orientation of the filter before it is inserted into the unit with regard to the
air flow
- Insert new filters into the unit.
- Align the filter holders so that they do not interfere with the installation of the plastic filter caps.
- Install the filter caps into the unit cover.
INSERT NEW FILTERS
1 ATTACH THE FILTER CAPS
PRESS THE FILTER RESET BUTTON 3
2
Fig. 37
-
Pay attention to the correct orientation of the caps, they fit only in one position. The FILTER sign must
be oriented bottom-up.
6.3. Reset filter countdown
- Press and hold the red (white) FILTER RESET button until the red LED on the controller switches off
(approx. 2 sec).
o
If the control flashes the error message – fan error (11 or 12 – see Section 8.1.), ignore it.
44
Version 1 – GBR(23/06/2021) D-502-0152
Fig. 38
- Switch off the unit on the controller by pressing button 2 for approx. 3 sec.
- Install the front metal cover on the unit according to Section 3.2.10.
- Switch on the unit on the controller by pressing button 2 according to Section 5.2. (2). All the error
messages and filter clogging indication switched off.
- The unit is now ready to operate.
- If the filters are not properly replaced (cleaned), the functionality of the unit may be reduced.
-
Never operate the unit without air filters, the recuperator may be damaged.