SIQENS Ecoport 800
Installation
Page 25 of 48
4.5.
Connecting the control panel
1.
Connect the data cable
Use the data cable (Ethernet RJ-45) included in
the accessories to connect the Ecoport to the
control panel.
The control panel is supplied with power via the
data cable.
As soon as the Ecoport is connected to a battery,
the control panel automatically establishes a
connection. This requires no further input.
2.
Connect the LTE antennas
To use SIQENS remote monitoring, the two LTE
antennas must be attached to the control panel.
Please note that a mobile signal is required to
establish a connection.
3.
Check the network connection
If the value for the IP address in the “
I
nfo” menu
is 127.0.0.0, the Ecoport has no connection to the
mobile network.
Please check the position and connection of the
LTE antennas.
