Sinterit LISA PRO User Manual | 9
ATTENTION!
•
During printing, if there is a lot of smoke, irritating smell or other alarming
circumstances take place, press the Safety button. It will immediately cut off
the power from the printer.
•
However, remember that it is impossible to open the printer (e.g.: by lifting the
Lid) until the temperature inside will not drop below 50°C and the UNLOCK LID
option becomes available.
WARNING!
NITROGEN INSTALLATION
Possibility of unsealing - gas has a suffocating effect on people by displacing oxygen
from the air. Too low oxygen concentration in the air can lead to unconsciousness
and death. Inhalation exposure may cause short breath, breathing difficulties,
headaches and dizziness, with high concentrations of gas disorders of orientation,
nausea, fainting, loss of consciousness, death.
•
Store in a well-ventilated place.
•
Do not inhale the gas.
•
Nitrogen is an inert gas, a natural component of atmospheric air. It is not
harmful in the aquatic environment or soil, its adverse effect is limited to the
displacement of oxygen.
•
The built-in oxygen level sensor is not a certified device and the signal cannot
be treated as the only warning. Keep the Lisa PRO printer and the nitrogen
bottle in well-ventilated rooms.
•
If you hear an alert, open the windows/ventilate the room and leave the room.
•
If you feel any suspicious symptoms, immediately leave the room and go
outside/to a well-ventilated room.
ATTENTION!
LASER PROTECTIVE GLASS
•
The cleaning process of the Laser Protective Glass should be carried out outside of the printer.
•
Do not clean the Laser Protective Glass under running water.
•
Only use products with ethyl alcohol. We recommend Alcohol pads (available in the Service
Kit).
ATTENTION!
While the printer is working do not touch any other elements besides: the LCD touch screen, the
Safety button, the USB port and the Power switch.
F. SAFETY DURING REPAIR AND MAINTENANCE
WARNING!
•
Only skilled persons should carry out repairs.
•
Read the operator’s and maintenance manual carefully before using the
printer or doing any maintenance jobs.
•
During cleaning operations, maintenance jobs or when changing parts, the
Power switch must be off and the machine must be unplugged by removing
the Power cable from the socket.
•
During maintenance jobs, affix a notice to the appliance indicating „MACHINE
BEING SERVICED, DO NOT START”.
•
Do not adjust controls that are not described in the manual.