Sinterit LISA PRO User Manual | 7
ATTENTION!
When restoring original working conditions, the appointed personnel should make sure that at the
end of the operating procedure, proper printer operation safety conditions are restored, especially
the safety devices and the protective guards.
ATTENTION!
•
Never leave miscellaneous materials on the printer Lid.
•
Make sure all the guards and protection of the printer are in place and that all the safety devices
are in place and working properly.
STOP!
Climbing on the printer is forbidden.
C. PERSONAL PROTECTION
ATTENTION!
Wear individual protections. Before starting any work with powder, always wear adequate protective
clothing, eyewear, face mask, and gloves.
ATTENTION!
•
The operator must always wear antistatic clothes and shoes.
•
The floor in the working area must be antistatic.
WARNING!
Avoid prolonged contact with powders and inhaling their vapours.
STOP!
Do not wear loose or hanging clothing such as ties, scarves or torn garments that
could become trapped by the printer.
D. POWER SUPPLY AND GROUNDING SYSTEM
WARNING!
•
Before plugging in, make sure the power voltage and frequency are those
shown on the machine plate.
•
When an extension cord is used for the power supply of the product, make
sure that the total power consumption of all devices connected to it does
not exceed the extension cord’s limit. Also, make sure that the total current
drawn by connected equipment does not exceed the ampere rating for AC
wall outlet.