18 | Sinterit INTERTEK Vacuum Cleaner USER MANUAL
A. PREPARING THE MACHINE TO WORK WITHOUT SINTERIT POWDER SEPARATOR
1. Fit the Antistatic hose
A
into the Aluminium connector 40/50
B
and next into the Suction hose connector
9
. At the
same time, lift the locking screw of the suction hose connections (Image 10, part 1) and insert the Antistatic hose
(Image 10, part 2).
1
2
Image 10. Connecting the Antistatic hose to the vacuum cleaner.
2. Fit the accessory required for the type of vacuuming operation on the opposite end of the hose
A
.
•
For work with powder, choose: Rubber nozzle with aluminium connector
C
.
•
For cleaning the printer, choose: PVC brush
D
.
•
For cleaning the working area around the printer, choose Double curved wand
F
and Floor brush
G
.
3. Make sure the power supply corresponds to the voltage and frequency indicated on the vacuum cleaner safety plate.
4. Ensure that the Power cable
8
and the optional extension are in perfect conditions.
5. Connect the vacuum cleaner grounding system
7
to a conductive surface.
6. Plug the Power cable into the power supply.
7. Grab one end of the Antistatic hose complete with selected accessories.
8. Turn on the vacuum cleaner by switching the Power Switch
14
from “0” to “1”.
9. Hold the vacuum cleaner pipe/hose tightly and start suctioning the powder from the printer or clean a device.
10. To stop the vacuum cleaner, switch the Power Switch from “1” to “0”.
11. After finishing work, disconnect the vacuum cleaner grounding system
7
and Power cable
8
from the power socket.
8. Information and tasks while powder suction
WARNING!
Operations permitted within Class II Division 2 Group F and G class areas, with
potentially explosive atmosphere.
ATTENTION!
During vacuuming, avoid rolling up or bending the flexible Antistatic hose and
Power cable.
IMPORTANT!
To move the vacuum cleaner (especially when the machine is switched on), use the Motor Head
handle
3
.
