Sinterit INTERTEK Vacuum Cleaner USER MANUAL | 15
WARNING!
EXPLOSION HAZARD.
DO NOT DISCONNECT WHILE THE CIRCUIT
IS LIVE OR UNLESS THE AREA IS FREE OF
IGNITIBLE CONCENTRATIONS.
AVVERTISSEMENT!
RISQUE D’EXPLOSION.
NE PAS SE DÉBRAMCHER LORSQUE LE
CIRCUIT EST VIVANT OU SAUF SI LA ZONE
EST LIBRE DE CONCENTRATIONS
IGNITIABLES.
WARNING!
EXPLOSION HAZARD.
DO NOT CONNECT OR DISCONNECT
WHEN ENERGIZED.
AVVERTISSEMENT!
RISQUE D’EXPLOSION.
NE PAS CONNECTER OU DÉCONNECTER
LORSQU’IL EST SOUS TENSION.
I. SCRAPPING
IMPORTANT!
In case of scrapping, all the component parts of the vacuum cleaner will have
to be disposed of through adequate disposal channels in accordance with
applicable legislation. Before scrapping, all plastic and rubber parts will have
to be separated from the electrical material. Parts made of plastic, aluminium
and steel only may be recycled if collected by special centres.
Sinterit cannot foresee all possible circumstances capable of representing a potential hazard. The warnings in this
manual and on the products should not, therefore, be deemed exhaustive. In the event of tools, procedures, work or
machining methods being used that are not explicitly recommended by Sinterit, make sure no hazards exist for operators
and others.
The following indications are, by themselves, not enough to fully protect against all the hazards that could arise during
vacuum cleaner operation. These will have to be integrated with common sense and the experience of the operator, both
of which are crucial factors for preventing accidents. Each section of this manual lists further specific safety warnings
for the various operations.
Maintenance jobs must always be performed with the power plug detached from the power supply.
6. Initial startup of the Sinterit INTERTEK Vacuum Cleaner after delivery
•
The machine is supplied in a strong cardboard box secured with straps.
•
Transport the package using a fork-lift truck of adequate lifting capacity and make sure it is stable and that weight
is properly distributed on the forks.
•
Before starting to move, make sure the transit area is free and that there are no moving objects on the packaging.
•
During movement, keep the load low for greater stability and safety.
•
When starting up the vacuum cleaner, move this using the supplied castors.
•
The appliance must never be moved using fork-lift trucks or other equipment that lifts it off the floor.
•
If for any reason there is a need to lift and transport the vacuum cleaner, this operation must be performed under the
responsibility of the user. The user is therefore invited to secure the load as he best thinks fit to ensure the operation
is performed safely.
ATTENTION!
Before installing the Sinterit INTERTEK Vacuum Cleaner, carefully check if it hasn’t been
damaged during transport.
