10 | Sinterit INTERTEK Vacuum Cleaner USER MANUAL
B. GENERAL SAFETY RULES
WARNING!
•
Equipment should be used only by trained staff in accordance with all applicable national
and local codes (NFPA70, C.E.C., NFPA 652, etc.).
•
Without prejudice for the above, it is recommended to keep the machine construction
complying with the safety standards prescribed by the NFPA 70 (NEC) and C.E.C.
WARNING!
•
Only adults should use the vacuum cleaner.
•
When using the machine, mind other people, especially children.
WARNING!
•
The vacuum cleaner must not be operated in a corrosive or explosive
environment.
•
Avoid prolonged contact with solvents and inhaling their vapours.
•
Avoid using the device close to open flames or sources of heat.
•
To reduce the risk of ignition of hazardous atmospheres, disconnect the
equipment from the supply circuit before opening.
•
Keep assembly tightly closed when in operation.
STOP!
EXPLOSION HAZARD.
•
Do not disconnect while the circuit is live or unless the area is free of
ignitible concentrations.
•
Do not connect or disconnect when energized.
ATTENTION!
•
Risk of crushing upper limbs while fitting and locking the material container
on the vacuum cleaner.
•
Never place hands between the Filtering chamber and Motor Head while
locking.
•
Do not put hands on the sides of the container near the guide pins while
locking.
•
Perform the container locking operation by means of the levers located on
the side, USING BOTH HANDS!
ATTENTION!
When restoring original working conditions, the appointed personnel should make sure that
at the end of the operating procedure, proper vacuum cleaner operation safety conditions are
restored, especially the safety devices and the protective guards.
WARNING!
•
Never leave miscellaneous materials on the horizontal protection cap.
•
The Motor Head’s protection cap containing moving parts must not be removed by the user.
•
Make sure all the guards and protection devices are in place and that all the safety devices
are in place and working properly.
