4-5
2)
If the card move to the position shown in
the following figure, pick up the end of
the card and pull it up (as tilt it slightly
backward
）
, and remove it.
（
When the card is at the discharge port side
）
1)
Turn the knob
②
(green) on the left side of
the printer, move the card to the front
side.
2)
When the card is discharged from the port,
pull the card from front, and remove it.
（
When cannot see the card
）
１）
Turn the knob
②
(green) in the
direction shown in the following figure.
Turn the knob
②
for a while(about 5 turns),
then when the card appears as follow
figure, pull it up, and remove it.
Card
Knob
②
