Chapter 4. Error Handling
4-1
Printer Status lamps
The details of the error can be confirmed with the printer status lamps.
Printer Status Lamps and Card Setting Lamp display ●:on
、
○:off
、＊
:flashing
LED Display
Status
Corrective Action
POWER
MEDIA
ERROR
＊
○
○
The printer is processing.
Wait until the operation is
completed.
●
○
＊
The card set unit or the
upper unit are opened.
Close the card set unit or
the upper unit.
●
○
●
Card jam occurred.
Remove the card. If card
jam occurs frequently,
consult with the service
center.
Trouble of printer control
board.
The printer mechanical
section is faulty.
If it occurs frequently,
consult with the service
center.
●
＊
●
The ink ribbon set is not
supported.
Ink ribbon or printer
abnormality is assumed.
Consult with the Service
Department.
●
●
●
Dust box is full.
Empty the dust box.
The card is not set.
Card empty.
Set the card.
The ink ribbon is not
loaded.
Ribbon empty.
Set the ink ribbon.
Replace the ink ribbon.
●
＊
○
The ink ribbon initial
process is executed.
Wait until the initial
processing is complete.
