Sindoh A1 Series, Руководство пользователя

Страница: 109 / 133

1.7 Orange Cover
The orange cover is made of translucent orange acryl (PMMA) material in order to allow users to check
the situation of inside the device. Orange acryl is a specially selected material to safely shield the laser
beam.
To prevent users from accidentally using the device with the cover open, double safety devices are
used; when the cover is opened during printing, the device is designed to temporarily stop printing for
user’s safety. However, because it may result in the degradation of print quality or printing failure, do
not open the orange cover during printing by mistake.
1.7.1 Opening the Orange Cover
To open the orange cover, insert fingers into the bottom of the cover, and lift it up.
Lift the center part of the cover in order to open easily. If you lift the left or right part, force is
dispersed, which needs more force than the center.
1.7.2 Closing the Orange Cover
To close the orange cover, grasp the top center of the cover by fingers and pull it down. If you pull the
cover slightly forward, it will automatically fall down slowly thanks to weight of the cover itself.
5 Maintenance