Sindoh A1 Series, Руководство пользователя

Страница: 18 / 133

8. Notices
❖ Noise Emission Level
The following noise level is measured in accordance of ISO 7779 and reported to meet ISO 9296.
Some modes may not be available in products you purchased.
Average Sound Pressure at 1 Meter Away
Printing 45dBA
Standby Under 40dBA
❖ Temperature/Humidity
• Machine
Operation 20℃~30℃ , 15%RH~70%RH
Shipping -20℃~40℃, 15%RH~95%RH (for 0℃ or lower temperature, room temperature should be
higher than the outdoor’s, must not touch the floor)
Storage -20℃~40℃, Below 80%RH (No condensation, must not touch the floor)
• Resin Cartridge
Shipping 10℃~50℃, 15%RH~95%RH (Must be sealed)
Storage 15℃~35℃, 20%RH~70%RH (Must be sealed, any light source must not exist)
❖ Disposal of the Products
Do not dispose the machine and consumables together with household wastes.
For disposal or recycling, contact your local sales office.
❖ EMI(Electromagnecit Interference) Notice
This machine complies with the limits for Class A.
Class (Industrial Device) : This is a class A Product. In a domestic environment this product may
cause radio interference in which case the user may be required to take adequate measures.
① FCC COMPLIANCE STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
② INFORMATION TO USER
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one m ore of the following measures:
Before Using the Device