Simrad SN90, Руководство оператора

Страница: 107 / 188

381295/B
105
Related topics
Defining settings related to user preferences and individual customizing, page 102
Enabling Coordinated Universal Time (UTC) on the bottom
bar
You can set up the SN90 to show Coordinated Universal Time (UTC). When disabled,
the SN90 uses local time.
Prerequisites
To enable UTC time, your SN90 Processor Unit must be set up to accept the NMEA
ZDA datagram. The NMEA ZDA datagram contains the universal time code (UTC),
day, month, year and local time zone.
Context
This is an "on/off" switch. The time is shown on the bottom bar of the SN90 presentation.
Procedure
1 Open the
Display
menu.
2 Select
Display Options
.
Observe that the
Display Options
dialog box opens.
3 Select
General
to open the page.
4 Select
UTC Time
to enable Coordinated Universal Time (UTC).
5 Select
OK
to save the selected settings and close the dialog box.
Related topics
Defining settings related to user preferences and individual customizing, page 102
Selecting which tooltips to appear in the user interface
When you move the cursor over the echoes in the SN90 presentation, small "tooltips"
are shown to provide additional information. The
Tooltip
page controls which tooltips
that are shown.
Context
Several tooltips can be shown in the SN90 presentation. When a tooltip is enabled,
the cursor location is detected and a small information box is shown. By default, the
information is related to the exact position of the cursor. Each tooltip represents a
specific piece of information, and they are listed separately.
Operating procedures