SimpliFire SF-BI30-E Скачать руководство пользователя страница 6

Страница: 6 / 26

SimpliFire • SF-BI30-E, SF-BI36-E • 2040-900 Rev. C • 2/13

B. Limited Lifetime Warranty

(continued)

This warranty is void if:

• The appliance is operated in atmospheres contaminated by chlorine, fluorine, or other damaging chemicals.

• The appliance is subjected to prolonged periods of dampness or condensation.

• There is any damage to the appliance or other components due to water or weather damage.

LIMITATIONS OF LIABILITY:

• The owner’s exclusive remedy and HHT’s sole obligation under this warranty, under any other warranty, express or

implied, or in contract, tort or otherwise, shall be limited to replacement, repair, or refund, as specified above. In no

event will HHT be liable for any incidental or consequential damages caused by defects in the appliance. Some states

do not allow exclusions or limitation of incidental or consequential damages, so these limitations may not apply to you.

This warranty gives you specific rights; you may also have other rights, which vary from state to state. EXCEPT TO

THE EXTENT PROVIDED BY LAW, HHT MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY

SPECIFIED HEREIN. THE DURATION OF ANY IMPLIED WARRANTY IS LIMITED TO DURATION OF THE

EXPRESSED WARRANTY SPECIFIED ABOVE.

Содержание SF-BI30-E



























Результаты поиска

Содержание SF-BI30-E

Отзывы:

Похожие инструкции для SF-BI30-E

Бренды по названию

Популярные бренды

SimpliFire SF-BI30-E, Руководство пользователя

Результаты поиска

Содержание SF-BI30-E

Отзывы:

Похожие инструкции для SF-BI30-E

Бренды по названию

Популярные бренды