SimpliFire • SF-BI30-E, SF-BI36-E • 2040-900 Rev. C • 2/13
12
WARNING!
Do not operate the unit if it is damaged or has
malfunctioned. If you suspect the unit is damaged, call
a qualified service technician to inspect and replace any
part of the electrical system if necessary.
Note:
A harmless slight brief odor may occur during first
use or after prolonged period of storage.
A. Manual Switch Function
:
The appliance can be operated by both remote control
and manual button. Once the unit has been properly
connected to a grounded electrical circuit, the unit can
be turned ON by pressing the Flame button. In any ac-
tive Flame mode, the Heater button function is available.
If the Flame effect is OFF, there is no Heater button
function. See Figure 5.1.
Flame Button
By pressing the FLAME button, the unit will cycle
through four flame effects.
Heater Button
- Press the heater button once to turn 750W power on.
Appliance will beep and illuminate 1 red LED.
- Press again turns 1500W power on.
Appliance will beep and illuminate 2 red LEDs.
- Press third time turns heater off.
NOTE:
There is a brief delay between the heater command and
the heating turning ON. When the appliance receives
a heater ON command, the appliance blower will turn
ON for 8 seconds before the heater turns ON. There is
also an 8 second delay between heater off and blower
shutdown.
Figure 5.1 Manual Operating Switches
5
OPERATING INSTRUCTIONS
Flame Button
Heater Button
