Simonelli MUSICA, Руководство по обслуживанию

Страница: 40 / 100

WARNING
Every time you work directly .
With the heater it is important to ensure that
the internal pressure is zero . Completely
remove the water inside for operations that
require it .
To empty the heater proceed as follows:
1 Turn off the machine and let out all the steam
by opening fully the steam outlets to lower
the temperature quickly.
2 Remove covers:
• Side panels;
• Rear panel;
• Front panel.
WARNING
Before carrying out the heater emptying pro-
cedure, remove water inlet sources inside the
waterline:
• Waterline version: close the water inlet
tap and disconnect the pipe .
• Tank version: remove the tank from its seat .
These operations are necessary to avoid any
water leakage inside the machine that may
cause damage .
5.1
EMPTYING THE HEATER
3 Place the machine on the right side to pre-
vent water leakage and loosen the drain nut
“A” using a 13 mm wrench.
DANGER
Before proceeding with the operations
described in the chapter make sure that the
machine is turned off and unplugged from the
mains . Discharge any residual pressure pres-
ent in the steam heater .
DANGER
Fig . 57
Ed. 01 of 12/2015
5.2
SERvIcE MANuAl
Fig . 59
Fig . 58
A
Fig . 60