Simonelli MUSICA, Руководство по обслуживанию

Страница: 58 / 100

4 Take out the support of the lever “C” to
release the steam lever “D”.
DISASSEMBLY OF THE STEAM LEVER
1 Remove the machine front panel. Unlike the
nozzle, the lever is extracted together with
the panel.
2 Remove the Seeger ring “A” using the pliers.
3 Remove the piston “B” from the opposite
side.
D
C
Fig . 108
B
A
1
2
Fig . 107
MAINTENANCE OF STEAM NOzzLE
To carry out repairs and maintenance once the
steam nozzle is removed we can proceed with
the following steps:
1 Remove the piston which is actuated by the
lever. The seals that make it slide in its hous-
ing tend to wear out and must be replaced
depending on the use or every 4-6 months.
Fig . 110
5
To remove the dispensing nozzle it is suffi-
cient to unscrew the lower part of the nozzle
by hand.
Fig . 109
Ed. 01 of 12/2015
6.12
Service Manual