Simex SWI-94, Руководство пользователя

Страница: 46 / 56

User manual - WEIGHT METER SWI-94
Register Write Range Register description
48h Yes 0 ÷ 2
“ALArmS” parameter in “rELAy2” menu:
0 - no changes; 1 - on; 2 - off
49h
4Ah
Yes
Yes -99999 ÷
999999
“ SEt P2 ” parameter in “ rELAy2 ” menu, no decimal point included
4Bh Yes 0 ÷ 1
“SourCE” parameter in “rELAy1” menu (kind of value controlled
relay): 0 - “GroSS”; 1 - “nEtt”
Configuration of peaks detection function
70h Yes 0 ÷ 1
“ modE ” parameter in “ HOLd ” menu (type of detected changes):
0 - peaks; 1 - drops
71h
72h
Yes 0 ÷ 999999
“ PEA ” parameter in “ HOLd ” menu (minimum detectable change, no
decimal point included)
73h Yes 0 ÷ 199
“
timE
” parameter in “
HOLd
” menu, maximum peaks' (or drops')
display time expressed in seconds
74h Yes 0 ÷ 1
“ H diSP ” parameter in “ HOLd ” menu (the type of values displayed
on the display ):
0 - current measurement value; 1 - peaks (or drops) values
75h Yes 0 ÷ 1
“ H rEL1 ” parameter in “ HOLd ” menu (the control mode of relay R1
and LED R1) :
0 - control depends on current measurement values;
1 - control depends on peaks (or drops) values;
76h Yes 0 ÷ 1
“ H rEL2 ” parameter in “ HOLd ” menu (the control mode of relay R2
and LED R2) :
0 - control depends on current measurement values;
1 - control depends on peaks (or drops) values;
79h Yes 0 ÷ 1
“ H OUtP ” parameter in “ HOLd ” menu ( the control mode of current
output):
0 - control depends on current measurement values;
1
- control depends on peaks (or drops) values;
Functions of buttons and programmable input
80h Yes 0 ÷ 1
“b ZEro” parameter in “button” menu (function of zeroing
button): 0 - disabled; 1 - enabled
81h Yes 0 ÷ 1
“b tArE” parameter in “button” menu (function of tare button): 0 -
disabled; 1 - enabled
81h Yes 0 ÷ 1
“b nEtt” parameter in “button” menu (function of gross/nett
button): 0 - disabled; 1 - enabled
84h Yes 0 ÷ 2
“Pr inP” parameter (function of programmable input):
0 - input disabled; 1 - zeroing function; 2 - tare function
Parameters of analogue output operation
A0h 2 Yes 0 ÷ 3 “ Omod ” parameter in “ OUtP ” menu (active current output mode)
0
- current output disabled ;
1
- current output enabled with
4 ÷ 20mA mode; 2 - current output enabled with 0÷20mA mode ;
3
- current output controlled via RS-485 interface
46