Sime UNIQA REVOLUTION 25, Инструкция для пользователя, по установке и обслуживанию

Страница: 9 / 96

9
EN
2.2 Shutting down for long periods
If the boiler is to be left unused for a long period, the following
operations need to be carried out:
– press and hold the button
y
for at least 1 second, once if in
"WINTER mode"
n
or twice if in "SUMMER mode"
l
to put
the boiler into stand-by
"- -"
will appear on the display
– set the main system switch to "OFF"
OFF
Fig. 7
– close the gas valve
– close the heating and domestic hot water isolation valves
– drain the heating and domestic hot water system if there is
the risk of freezing.
m฀
CAUTION
Contact the Qualified Technical Personnel if the pro-
cedure described above cannot be easily carried out.
3 MAINTENANCE
3.1 Adjustments
For the appliance to operate correctly and efficiently it is recom-
mended that the User calls upon the services of a Professionally
Qualified Technician to carry out
ANNUAL
maintenance.
m฀
CAUTION
Maintenance interventions must ONLY be carried out
by professionally qualified personnel who will follow
the indications provided in the INSTALLATION AND
MAINTENANCE MANUAL.
3.2 External cleaning
a฀
WARNING
– Should it be necessary to access the areas in the
bottom part of the appliance, make sure that the
system components and pipes are not hot (risk of
burning).
– Before performing any maintenance, put on protec-
tive gloves.
3.2.1 Cleaning the cladding
When cleaning the cladding, use a cloth dampened with soap
and water or alcohol for stubborn marks.
d฀
IT IS FORBIDDEN
to use abrasive products.
4 DISPOSAL
4.1 Disposal of the equipment (European Di-
rective 2012/19/EU)
At the end of their life span, the appliance and
electrical and electronic devices coming from
households or classifiable as household waste
must be delivered to appropriate waste collec-
tion systems, in accordance with the law and
with Directive 2012/19/EU. This product was
designed and manufactured for minimising
its impact on the environment and on human
health, but it contains components that could
be detrimental if managed improperly. The
symbol (crossed-out wheelie bin) depicted here
and also appearing on your appliance means
that the appliance at the end of its life must
be managed in accordance with the law and
treated as electrical and electronic waste. Be-
fore delivering the appliance for its disposal,
consult the applicable provisions of the laws in
force in the country where the appliance is used
and get information on the authorised waste
disposal facilities by contacting the relevant lo-
cal offices.
d฀
IT IS FORBIDDEN
dispose of the product with urban waste.