Sime UNIQA REVOLUTION 25, Инструкция для пользователя, по установке и обслуживанию

Страница: 23 / 96

23
EN
6.3 Handling
During transportation, the boiler must be kept in a vertical po-
sition, and knocks against walls or hard surfaces should be
avoided.
d฀
IT IS FORBIDDEN
Position the appliance horizontally or on its side.
YES
NO NO
Fig. 17
Once the packaging has been removed, the appliance is to be
handled manually, keeping it as vertical as possible, and lifting
by gripping it at the points indicated in the figure.
NO!
Fig. 18
d฀
IT IS FORBIDDEN
To grip the appliance casing. Hold the "solid" parts of
the appliance such as the base and structural frame.
a฀
WARNING
Use suitable tools and accident protection when re-
moving the packaging and when handling the appli-
ance. Observe the maximum weight that can be lifted
per person.
6.4 Installation room
The room where the appliance is to be installed must comply
with the Technical Regulations and Legislation in force. It must
be equipped with suitably sized ventilation openings when the
installation is a "TYPE B" installation.
The minimum temperature of the installation room must NOT
be lower than
-5 °C
.
m฀
CAUTION
– Before assembling the appliance, the installer
MUST
make sure that the wall supports the weight.
– Remember to consider the space needed in order to
access the safety/adjustment devices and to carry
out maintenance interventions (see Fig. 19).
APPROXIMATE MINIMUM DISTANCES
≥ 50 mm
≥ 300 mm
≥ 900 mm
Fig. 19