Sime Planet Super 4 F.S., Инструкция по установке и обслуживанию

Страница: 34 / 76

4
When “PLANET SUPER 4 F.S.” is connec-
t ed t o t he “Logica Remo t e Contr ol”
r e g u l a t o r, t h e s e l e c t o r
CR/OFF/EST/INV/UNBLOCK must be
placed in the position ( ); the knobs of
the D.H.W. and C.H. potentiometers do
not have any effect and all of the func-
tions will be managed by the regulator
(fig. 9).
If the “Logica Remote Control” breaks
down, the boiler will function by placing
the selector on the ( or ), posi-
tion, obviously without consequent con-
trol of the room temperature.
The functioning instructions are inside
the lid (fig. 10). Every setting or modifi-
cation is displayed and confirmed on
the display (fig. 11).
LOGICA REMOTE CONTROL
1
6
7
8
4
5
3
2
KEY
1
Display
2 Info key
3 Operating mode key: automatic functioning
4 Operating mode key: manual functioning
5 Operating mode key: availability
6 Lid with instructions space
7 Temperature knob
8 On-line key
Fig. 10
KEY
1 Digits, hour
2 Heating programme
3 Unit (%/°C)
4 On-line key display
5 External temperature
6 Room temperature
7 Vacation function
8 Operating mode
9 Line number, day
10 Burner lit
11 Heating functioning
12 Hot water temperature/load hot water
Fig. 11
Fig. 9
- Deleting one or more
programs (fig. 8)
The on and off time must be deleted for
each program to be deleted.
Set selector (2) to position “P”. Select the
desired program with button (3), then
press button (4) to delete the day setting
(the triangular symbols for the days
should go away). If part of the program is
deleted, when you set selector (2) back
to the “RUN” position an error will appear
in the clock display, referring to the pro-
gram which is incorrect.
To delete all programs, put the selector in
position “P” and press buttons (3) and (5)
at the same time.
- Setting the SKIP function (fig. 8)
The SKIP function deactivates programs
for the next day and resumes regular
programming 24 hours later.
This function is useful if you will be out all
day and don’t need heating. To start this
function, press button (7), which is acti-
ve only when selector (2) is in “RUN”
position.
Once you have selected the SKIP func-
tion, it will go into effect at 0:00 of the
next day for 24 hours. You cannot turn it
off once it has started, so regular pro-
gramming will not resume until 24 hours
have passed.
1 Manual/automatic
operation selector
2 Program/schedule
setting selector
3 Program button
4 Day of the week button
5 Hour button
6 Minute button
7 SKIP button
8 Reset button
Fig. 8