97
ES
PT
ENG
4.5.3
HIGH EFFICIENCY PUMP (fig. 22/a)
Press.the.button.(4).briefly.(about.1.second).to.
select.the.pump.operating.mode..
The.relative.LEDs.will.indicate.each.time.the.
adjustment. mode. (2). and. the. characteristic.
curves.set.(3)...
Point. 4.5.3.4. reports. the. possible. combina-
tions.and.their.meaning..
When. the. LED. (1). signals. a. fault,. the. pump.
stops. and. attempts. to. run. restart. cycles.. If.
the. fault. is. solved,. the. pump. restarts. auto-
matically.
4.5.3.1 Venting the pump
The. pump. venting. function. is. activated. by.
pressing.the.button.(4).for.a.long.time.(3.sec-
onds).and.vents.automatically.
4.5.3.2 Factory settings
The. factory. setting. is. activated. by. pressing.
and. holding. the. button. (4). and. disabling. the.
pump.. When. the. pump. is. restarted,. it. will.
work.with.factory.settings.(delivery.state).
4.5.3.3 Manual restart
When.a.lockout.is.detected,.the.pump.tries.to.
start.automatically..If.the.pump.does.not.re-
start,.restart.manually.by.pressing.the.button.
(4).for.a.long.time.(5.seconds),.then.release.
it..The.restart.function.is.activated.for.a.maxi-
mum.of.10.minutes..After.the.restart,.the.LED.
indication.shows.the.previously.set.values..
If.the.fault.persists,.replace.the.pump..
1
2
3
4
Fig..22/a
Содержание MURELLE HE 25-30 ErP
Страница 2: ......
Страница 109: ...109 ES PT ENG NOTES...
Страница 110: ...110 NOTES...
Страница 111: ......