Page
9
of
10
Step 17
: Install the three extra long (M4 x
40mm) replacement screws through the
wheel rim and into the threaded adapter.
Note: Before fully tightening, check to make
sure all parts are aligned (keys are matching
keyways), and that no wires are being
pinched.
Step 18
: Install the shift paddles, throttle
paddle, and brake paddles using the #8
button head hex screws and washers.
Step 19
: Connect your wheel to the
Thrustmaster base via the “quick” disconnect
as you normally would.
Step 20
: Connect the 6-pin plug from your
paddles to either the 6-pin stand alone
connector, or the optional connector box.