Page
4
of
10
Step 3
: Remove the six screws holding the
back housing on.
Step 4:
Remove the back housing and turn
it over to access the paddle shifters.
PlayStation Rim Users: Now is when you
can unplug the 6-pin circuit board
connector.
Step 5
: Remove the four screws from each
of the two paddle shifter spring retainer
housings.
Note: The housing has a slight spring load
so it’s best practice to remove the screws in
a diagonal pattern and/or hold the housing
down while removing the screws.
Step 6
: Set the screws, housing, and springs
aside.