Page
8
of
10
Step 15
: Orient the Simability round adapter so that the keyway is facing up (away from the paddles),
and then install it onto the front of the paddle housing being sure the six wires are laying flat in their
grooves.
Step 16
: While holding the assembly
together, move it close enough to the
Thrustmaster wheel rim where you can install
the 6-pin Thrustmaster plug.
Note: Ensure the keyway on the adapter
aligns with the key on the Thrustmaster rim.
PlayStation Rim Users: You will most likely
need the back housing loose during this step
to plug the wire in.