Page
10
of
10
Step 21
: Connect the clear RJ-11 style clip
connector to your Thrustmaster base where
the stock Thrustmaster pedals would
normally plug in.
Note: If you’re using the optional connector
box with a DSD or Bondar 12-bit controller
then connect the controller board to USB
instead.
Step 22
: Turn the wheel on and go driving!
Please reference Thrustmaster’s instructions
for driver installation and calibration. Same
goes for in-game calibrations. Your SimAbility
paddles will emulate Thrustmaster pedals and
should be calibrated the same.
