Page
5
of
10
Step 7
: Remove the two screws from each of
the two paddle shifter rocker assemblies and
remove the stock paddles.
Note: If you purchased the custom Simability
paddles, then you will install them in the next
step. If not, you have a couple of options:
1)
If you are not using paddle shifters,
then you can just discard them for
now.
2)
You could also make your own
paddles, or cut the bottoms off of the
stock paddles.
Step 8
: Place one of the Simability paddle
shifter adapters into the back housing,
aluminum spacers facing away from you, and
then lower the stock Thrustmaster paddle
rocker assembly onto the Simability paddle
shifter adapter.
Here’s what it looks like outside of the wheel.