Page
2
of
10
Thank you for your purchase and we hope you enjoy your new Simability GT paddles. Please do
not hesitate to contact us at [email protected] if you have any questions, issues, or
suggestions about this product.
The SimAbility GT Paddles for Thrustmaster work on all Thrustmaster T300, TX (base only), and
T500 wheels where the stock Thrustmaster threaded adapter can be removed from the
Thrustmaster wheel rim. We’ve chosen to use the 599xx wheel for these instructions but the
process is similar for all other wheels.
Before you begin
: Your paddles come configured with a progressive brake rubber on the left
paddle. If you plan to remove the progressive brake rubber, or move it to the right paddle, now
is a good time to do that. Check the Adjustments and Tuning guide for more information.
Step 1
: Remove the three 2.5mm socket
head screws as shown.
2.5mm hex L-key wrench included
[picture with red-marking]
Info: These three screws retain the stock
Thrustmaster threaded adapter to the
wheel. The other three screws should not be
removed as they hold the circuit board to
the wheel.
