Silverton 45 convertible, Руководство оператора

Страница: 62 / 227

SYSTEM OPERATIONS-2
Each air conditioning unit is controlled by
an independent thermostatic control panel
(“Elite Control”), which is located within the
respective cooling/heating zones. The de-
sired zone temperature is manually set on
the “Elite Control” and the air conditioning
unit is activated to supply cooling or heating
as required to constantly maintain the tem-
perature selected. The photo below shows
the control.
Each air conditioning unit will operate in a
“Dehumidi fi cation” mode upon demand
and is controlled by the “Elite Control”.
Refer to the Marine Air Systems Opera-
tion and Maintenance Manual for a com-
plete description and instruction in the
operation of this mode.
Operation of the Air Conditioning/Heat-
ing System in your 45C is as follows:
Turn ON the respective air conditioner
breaker switch, located on the AC Electrical
Panel (See
AC Electrical Pages in the Sys-
tem Operations Section of this manual).
Make sure Air Conditioner Pump is “ON”.
Make sure seawater intake is open and
seawater pump is operating properly.
Refer to the Marine Air Systems Opera-
tion and Maintenance Manual for a detailed
description of the function of each button
located on the “Elite Control”.
All Air Conditioning units create conden-
sation, which creates water that has to be
drained.
Drain Locations for each unit:
V-Berth - Shower Sump Pump
Galley - Directly overboard
Salon - Directly overboard
Bridge - Directly overboard
Make sure shower sump circuit breaker is
turned on when operating the Air Condition-
ing. The Shower Sump Pumps are on a
Fuse behind the DC Panel. The 24V Main
DC Breaker must also be “ON”.
Turn ON the power button, located on
the respective air conditioning unit “Elite
Control”.
Press the fan speed button on the “Elite
Control” until the desired speed is ob-
tained.
Press the appropriate temperature con-
trol button (Down/Up) to obtain the desired
temperature.