Silverton 45 convertible, Руководство оператора

Страница: 138 / 227

SYSTEM OPERATIONS-78
To reduce the risk of electrolysis and
galvanic corrosion, Silverton recommends
the installation of sacri
fi cial zinc anodes
on the trim tab plates at least once a year,
preferably during preparation for spring
launch. DO NOT paint the sacri
fi cial zinc
anodes.
Periodically examine the trim tabs for
accumulation of underwater growth and
clean as necessary. Underwater growth
will affect the boats performance.
Periodically examine the trim tab pump
and hydraulic lines, which are located
in the bilge area, for leaks (Refer to the
Mechanical Schematic in the Schematic
Section of this Owner’s Manual for the lo-
cation of the trim tab pump). Tighten con-
nections if leaks are noted. If the hydraulic
lines appear worn or chafed, contact your
Silverton dealer for inspection and re-
placement, if necessary.
The Trim Tabs run on 12DC power and
the breaker is located at the Helm Breaker
Panel.
Refer to the BENNETT TRIM TAB Manual
included with your owner’s packet for tech-
nical information concerning the operation
and maintenance of the trim tab system.