22
When the unit was taken off its packaging make sure that it is
strong, not bent and has no fault at all. In the event of any
doubt consult the dealer.
Cut off the electric connection of the unit from the main switch
during installation.
In order that built in cook-tops will operate smoothly the
measurements of the counter on which it will be mounted and
the materials used for installation should be proper, and the
counter should be resistant against heat.
Read the following instructions to fix the hob on the
counter:
In order to prevent insertion of the foreign materials and liquids
between the hob and the counter att
aché the adhesive band on
the counter hole without allowing any overlapping before the
installation.
Place the hob on the counter hole to center the installation hole.
Secure the unit on the counter by using the installation sheet and
screws.
Please review the following figures carefully so that the hob will
be installed properly.
INSTALLATION INFORMATION ON THE UNIT
This equipment should be mounted at the well ventilated places
and as per the regulations in force. The installation personnel
should consider the laws and norms applicable to the release of
burning gases and ventilation.
Your hob is designed to be installed on the standard counters
which you may find in the market.
The materials used on the surface and the link partitions under
the
counter should be resistant against minimum 100°C.
Содержание AS5323X01
