![background image](http://html1.mh-extra.com/html/silverline/as5323x01/as5323x01_user-manual_1273374033.webp)
29
ADJUSTMENT OF HOB PER GAS TYPES
These instructions are prepared for specialist personnel having
required competence, the installation of the equipment should be
suitable as per the applicable standards.
All gas related works should be conducted when the electric
connection was cut.
In order to convert the hob, remove the burner plates and flame
circles thereon. Replace the injectors as per the followings, and
change them with the injectors with suitable diameters defined
in the user’s manual. Conduct the works with a plain tip
screwdriver at a position to see valve setting screw by removing
the switches of the hob and rubber seals. In order to set the low
flame level, turn the gas setting screw on the valve to have
minimum gas setting flow. Do this setting after installing the
burner component of the burner, burning the burner and bringing
the switch setting to minimum.
Flow setting screw should be tightened in LPG conversions as it
should be released for conversion from LPG to natural gas.
After the setting of the hob, complete the conversion procedure
by connecting the rubber seals and switches in the same order.
These instructions should be used by an authorized service. The
products should be installed as per the regulations in force and in
proper manner. Before conducting any transaction the electrical
connections of the hob should be cut by no means.
The type label on the hob indicates the gas type planned to be
Содержание AS5323X01
