6
GB
Unpacking Your Tool
•
Carefully unpack and inspect your tool. Fully familiarise yourself with all
its features and functions
•
Ensure that all parts of the tool are present and in good condition. If any
parts are missing or damaged, have such parts replaced
Assembling Your Bump Feed
Trimmer
1. Attach the Trimmer Guard (6) using the fixings included. Ensure that
the fixings are holding the guard securely in position
2. Attach the Roller Guide (7) using the fixings included
3. Attach the Adjustable Secondary Handle (3) using the fixings included
NOTE:
The secondary handle is fully adjustable and must be positioned
each time to ensure that the user is comfortable using the trimmer.
Before Use
•
Ensure that the shaft length is adjusted to suit the user. To adjust the
shaft length, slide the Shaft Adjustment Switch (2) downwards and slide
the shaft to the required setting
NOTE
: Make sure the shaft has completely engaged into a locating notch
prior to use.
Using Your Trimmer
Power supply
•
Use of an RCD (residual current device) will reduce the chance of electric
shock when using an outdoor power tool
•
If it is necessary to use an extension lead, check that the lead is
specifically intended for outdoor use
Switching on
1. Ensure the trimmer head is in the correct position
2. Place the trimmer down, and connect the mains power supply
3. Pick up the trimmer; hold the machine with one hand on the Handle
(5), and the other on the Adjustable Secondary Handle (3). The handle
is equipped with an integrated Safety Switch (8)
4. To start the machine, squeeze the Safety Switch (8), and then the On/
Off Switch (4). The machine will run until the on/off switch is released
Function change
1. Ensure that the trimmer is unplugged from its power source
2. Press and hold the Function Change Button (1), and rotate the end of
the trimmer
3. When the trimmer has successfully located, release the function
change button. To check the head is secure, attempt to rotate the head
without using the function change button. The head should not move
Cutting
1. Always keep the machine at arms length, with the trimmer head
pointed away from your body
2. Move the trimmer head across the area to be trimmed using a smooth
sweeping motion
3. When approaching an edge or wall, use the roller guide to prevent
cutting or damaging other surfaces in the garden
4. Always be aware of the position of the power cord. Keep the power
cord well away from the cutting area at all times
Feeding the trimmer line
1. Turn the trimmer on
2. Press the Spool Housing (9) gently against the ground and the spool
will release trimmer line
3. The guard has a cutting edge which will cut off any excess line
released by the spool
Maintenance
WARNING:
Always remove the plug from the mains power supply before
carrying out any maintenance/cleaning.
Spool maintenance
•
After every use, ensure that all waste material is removed from the spool
Cleaning
•
Keep your machine clean at all times. Dirt and dust will cause internal
parts to wear quickly, and shorten the machine’s service life. Clean the
body of your machine with a soft brush, or dry cloth. If available, use
clean, dry, compressed air to blow through the ventilation holes
Disposal
•
Do not dispose of power tools, or other waste electrical and electronic
equipment, with household waste
•
Contact your local waste disposal authority for information on the correct
way to dispose of tools
1
Function Change Button
2
Shaft Adjustment Switch
3
Adjustable Secondary Handle
4
On/Off Switch
5
Handle
6
Trimmer Guard
7
Roller Guide
8
Safety Switch
9
Spool Housing
Product Familiarisation
Содержание 400W Trimmer Bump Feed 267213
Страница 3: ...2 7 6 1 3 2 5 8 9 4...
