Silvercrest 315523, Руководство по эксплуатации

Страница: 34 / 158

GB
│
IE
│ 31 ■
SWWS 240 C2
Before first use
1) Wipe the appliance with a damp cloth both inside and outside
to remove any residual dust left over from transport . Dry it well
so that there is no moisture left in the appliance .
2) Place the appliance on a level and heat-resistant surface . Also
keep in mind that wax splashes may drip onto the surface . The
surface should therefore be easy to clean .
Automatic switch-off
After 60 minutes, the appliance will switch off automatically . After
55 minutes, the control lamp
2
will start flashing to notify you that
the appliance is about to switch off automatically .
The automatic switch-off is not intended as a substitute for removing
the plug from the mains power after use! It is merely a safety feature!
Always remove the plug from the mains power socket when the
appliance is not in use!
Preparing the appliance
Once the appliance is set up on a suitable surface:
1) Remove the wax discs
9
from its packaging .
NOTE
► The only difference between the honey-coloured and the pink
wax beads
9
is the colour .
2) Add the required number of wax discs
9
to the inner bowl
1
.
Use the following standard values as an orientation aid . The values
may vary .