28 GB
• In order to separate the two juicer
cones
|
10
+
11
again, press the small
ridges inwards and upwards out of the
recesses.
7.2 Assembling the citrus
press
DANGER!
~
Only plug the mains plug
|
3
into the
wall socket after the device has been
completely assembled.
1. Place the base unit
|
4
on a dry, solid
and level surface.
Figure A:
2. Place the citrus press attachment
|
5
onto
the base unit
|
4
in such a way that the
two citrus press symbols
are lined
up.
NOTE:
you can lift off the entire citrus press
attachment
|
5
, complete with drive axle
|
7
and cover ring
|
6
, and replace it again.
These two parts can be removed e.g. for
cleaning.
3. Insert the cover ring
|
6
and the drive ax-
le
|
7
if necessary.
4. Place the juice container
|
8
into the cit-
rus press attachment
|
5
.
5. Place the screen
|
9
into the juice con-
tainer
|
8
. The small grooves in the mid-
dle of the screen need to fit onto the
ridges on the juice container.
6. Place the small juicer cone
|
10
or the
assembled juicer cones
|
10
+
11
onto
the drive axle
|
7
.
7. Insert the mains plug
|
3
into a wall
socket corresponding to the technical
data.
7.3 Drip stopper
Figure D:
the outflow
|
2
of the juice con-
tainer
|
8
has an integrated drip stopper func-
tion. If you want to remove or replace the
container under the outflow, you can close
the drip stopper to prevent juice from drip-
ping out.
NOTE:
ensure that the drip stopper is open
during juicing, so that the juice does not col-
lect in the juice container
|
8
.
• To close the drip stopper, gently press
the outflow
|
2
upwards.
• To open the drip stopper, gently press
the outflow
|
2
downwards.
11
10
7
6
Содержание 302511
Страница 2: ...Deutsch 2 English 20 Français 36 Nederlands 54 éesky 70 Español 86 Português 104 ...
Страница 21: ...19 DE ...
Страница 105: ...103 ES ...
