A N 6 3 3
40
Rev. 0.7
9.4.7. UART interface Module
The UART related source files, called uart.h and uart.c, are located in the /src/driver/ folder. In order to use this
module, the functionality needs to be initialized at the very beginning of the program.
Bytes can be sent and received as well and the functionality uses the uart interrupt service routine.
Function Name:
void
vHmi_BuzzHandler
(void)
Description:
This function is used to handle buzzer management.
Function Name:
U8
Comm_IF_RecvUART
(U8 * byte)
Description:
This function is used to receive bytes from UART.
Output Parameters(s):
*byte Pointer to the first element of the incoming data.
Return Value:
True if there is an incoming data otherwise FALSE.
Function Name:
U8 Comm_IF_SendUART
(U8 byte)
Description:
This function is used to send bytes through UART.
Input Parameters(s):
byte : data to be sent
Return Value:
True if sending data completed successfully otherwise FALSE.
Function Name:
void
Comm_IF_EnableUART
(void)
Description:
Enable and set the UART0 peripheral
Return Value:
None
Содержание EZRADIOPRO Si4060
