Silicon Graphics WebFORCE, Руководство по установке

Страница: 31 / 42

Logging In to the Server and Initializing WebFORCE Internet Gateway
21
10. When you see the root shell prompt, mymachine
1#
, you are ready to test the
network connection between the server and other machines on your LAN.
■
Verify that the system on which you will use your Web browser can receive
network packets from the gateway server. Enter
/usr/etc/ping
ip_address.
Replace ip_address with the IP address of the system on which you will run the
Web browser. You should see output similar to the following:
PING 151.166.96.20 (151.166.96.20): 56 data bytes
64 bytes from 151.166.96.20: icmp_seq=0 ttl=255 time=1 ms
64 bytes from 151.166.96.20: icmp_seq=1 ttl=255 time=1 ms
64 bytes from 151.166.96.20: icmp_seq=2 ttl=255 time=1 ms
64 bytes from 151.166.96.20: icmp_seq=3 ttl=255 time=1 ms
64 bytes from 151.166.96.20: icmp_seq=4 ttl=255 time=1 ms
After several lines of output from ping , press
Ctrl+C
to interrupt the program.
You should see lines similar to the following:
----151.166.96.20 PING Statistics----
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 1/1/1 ms
This indicates a properly-functioning connection between your gateway server
and the other machine on your network.
■
If there is a network problem, the ping command displays only the following
line:
PING 151.166.96.20 (151.166.96.20): 56 data bytes
If this happens, press
Ctrl+C
to interrupt the program. You see lines similar to
the following:
----151.166.96.20 PING Statistics----
5 packets transmitted, 0 packets received, 100% packet loss
If this happens, verify that both machines are attached to the network and that
the cables are connected securely. Also, try using the
ping command to check the
connection to other machines on the network and compare the results. If you
are connecting the two machines directly (without using a hub or concentrator),
make sure the cable is properly wired.
If there are no network problems, you are now finished initializing WebFORCE
Internet Gateway. You are ready to finish configuring your Internet Gateway server
using a Web browser.