Silicon Graphics WebFORCE, Руководство по установке

Страница: 30 / 42

20
Chapter 3: Setting Up the Terminal Emulator and Starting WebFORCE Internet Gateway
6. You are prompted to verify the information you just entered:
Verify Configuration. You have entered:
Hostname: mymachine
Domainname: acme.com
IP Address: 151.166.96.36
Netmask: 0xffffff00
Is this correct? [y/n]
■
If the information is correct, type
y
and press
Enter
.
■
If you wish to start over and change any of the information, type
n
and press
Enter
. The procedure begins again from step 2.
7. When you are satisfied with the gateway server configuration (you enter
y
in the
preceding step), you are prompted to reboot the server:
You now need to reboot your server to put your changes in effect.
After your server reboots, complete these steps:
1. Open a Web browser on your computer
2. Open the URL “http://151.166.96.36:2077/” in the browser
3. Select “Setup Tasks” on the WebFORCE Internet Gateway Web page
to continue connecting to the internet.
After your server reboots, you can close this terminal window on
your terminal (or personal computer) window.
Reboot server now? [y|n]
To reboot the server, type
y
and press
Enter
. This not only reboots the server, but it
causes the server to reconfigure itself with the new information you have provided
in the preceding steps.
8. Once the server has rebooted, you see the following in your terminal emulator
window or screen:
mymachine
login:
Instead of mymachine , you see whatever name you assigned to the gateway server.
9. Log in to the server again. At the prompt
mymachine
login:
type
root
and press
Enter
.