Silicon Graphics Prism, Руководство пользователя

Страница: 230 / 250

208 007-4701-003
C: Installing Rack Systems
Removing a Tall Rack from the Shipping Crate
Warning:
In its maximum configuration, a tall rack system weighs approximately 1,366
lb (620 kg). Use caution when you unpack and move this rack. Ensure that the rack remains
on a level surface and that the rack weight remains evenly distributed across the four casters.
To unpack a tall rack, you will need the following tools:
• Extension, 6-inch, 3/8-in. drive
• 13-mm standard 3/8-in. drive socket
• Ratchet, reversible, 3/8-in. drive
See Figure C-6 as you follow these steps; the numbered illustrations correspond to the numbered
steps.
1. Ensure that the temperature of the rack is acclimated to the environment in which you are
installing it and that the system crate is in a stable, upright position.
2. Remove the bands that secure the crate.
Note: Brace the wooden ramp as you remove the horizontal band that surrounds the crate and
the wooden ramp. The ramp moves freely after you remove this band.
3. Place the ramp so that the three holes in the edge of the ramp align with the pegs in the base
of the pallet deck.
4. Remove the cardboard cover, the two cardboard sidewalls, and the foam cushion.
5. Remove the bolts that secure the rack to the pallet deck, as follows:
a. Remove the top four bolts from the rear mounting bracket; do not remove the bottom
bolts.
b. Remove the four bolts that secure the front mounting bracket and tip tray to the bottom
of the pallet deck. Set the tip tray aside.
c. Remove the top four bolts from the front mounting bracket. Set the mounting bracket
aside.
6. Use two people to roll the rack out of the crate and down the ramp.