Silicon Graphics InfiniteStorage C1104-GP6 Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 76

background image

Drive Bay Installation/Removal

007-6465-001

45

Note:

You must use approved hard-disk or SSD drives in the system.

Removing Hard Drives or Carriers from the Chassis

1. Press the release button on the drive carrier. This extends the drive carrier handle.

2. Use the handle to pull the drive carrier out of the chassis.

Important:

Empty carriers without drives must stay in the chassis during operation for proper

airflow/cooling purposes except during remove/replace operations. Do not operate the server with
carriers removed.

The Hard Drive Backplane

The hard drives plug into a backplane that provides power, drive ID and bus termination. A RAID
controller and/or optional RAID software can be used with the backplane to provide data security.
The operating system you use must have RAID support to enable the hot-swap capability of the
hard drives. The backplane is preconfigured, so no jumper/switch configuration is required.

Caution:

Be careful when working around the drive backplane. Do not touch the backplane with

your fingers or any metal objects and make sure no ribbon cables touch the backplane or obstruct
the holes, which aid in proper airflow.

Disk Drive Installation

The drives are mounted in drive carriers (

Figure 6-1 on page 46

) to simplify their installation and

removal from the chassis, see

Figure 6-2 on page 46

for a disk removal example. These carriers

also help promote proper airflow for the drives. For this reason, even empty carriers without hard
drives installed must remain in the chassis during operation. See

Figure 6-3 on page 48

for an

example drive carrier and the “dummy” drive blank used when a working disk is not installed in
a drive slot.

!

«
...
55
56
57
58
59
...
»

Содержание InfiniteStorage C1104-GP6













































































Отзывы:

Нет отзывов

Похожие инструкции для InfiniteStorage C1104-GP6

Бренд: Unisys Страницы: 20

Бренд: Xerox Страницы: 2

Бренд: NEC Страницы: 74

Express5800/T120e

Бренд: NEC Страницы: 6

Express5800/T120e

Бренд: NEC Страницы: 2

Express5800/T110i

Бренд: NEC Страницы: 2

EXPRESS5800/R320d-E4

Бренд: NEC Страницы: 19

Express5800/R320d-M4 Series

Бренд: NEC Страницы: 98

Express5800/R120h-2M

Бренд: NEC Страницы: 2

Express5800/R120f-1E

Бренд: NEC Страницы: 12

Express5800/R120d-1E

Бренд: NEC Страницы: 2

Express5800/R110i-1

Бренд: NEC Страницы: 2

Express5800/R110h-1

Бренд: NEC Страницы: 40

Express5800/A2040d

Бренд: NEC Страницы: 83

Express5800/320Lc

Бренд: NEC Страницы: 4

Express5800/120Rj-2

Бренд: NEC Страницы: 2

Бренд: NEC Страницы: 106

Express5800/T120d

Бренд: NEC Страницы: 153

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды