Silicon Graphics COPAN 400T/TX, Руководство по обслуживанию

Страница: 49 / 88

COPAN 400T/TX - Service Manual 4-5
9. Enable NTP - To enable the use of NTP (Network Time Protocol). Type Y (yes) or N (no).
10. Confirmation Screen - Accept the configuration displayed on the confirmation screen.
11. Select HBA Family - Select the target mode HBA.Type 2400
. Note: For a Failover
system type: 2400mid .
12. Unmount the USB Flash drive and remove it from the USB drive.
13. You will find a log file, X-rays, and configuration backup in the /usr/local/revolution-
archive directory.
4.3.1 Gather WWPNs
1. From the KVM, log in to the PSM.
2. Gather the WWPN for each shelf connected to this Application Processor. Note that Shelf 0
is located on the bottom and Shelf 7 is located on the top of the cabinet. Use the following
table to record this information:
Example Output
Do you want to configure NTP (Network Time Protocol) service on this
appliance (Y or N)? y
Example Output
Revolution server supports the following target mode HBAs
NOTE: Revolution server only supports one target mode HBA at a time
2200) QLogic 22xx (ISP2200) host adapter family
2300) QLogic 2300 (ISP2300 and ISP2312) host adapter family
2322) QLogic 2322 (ISP2322) host adapter family
2400) QLogic 2400 (ISP2422 and ISP2432) host adapter family
q) No Fibre Channel target mode support
Select HBA class: 2400
Shelf Number WWPN
0
1
2
3
4
5
6
7