Silicon Graphics COPAN 400T/TX, Руководство по обслуживанию

Страница: 31 / 88

COPAN 400T/TX - Service Manual 3-7
5. Reaching inside the cabinet, insert the two square tabs at the back of the rail in the square
holes to your right.
•
When installing AP0, the square tab at the bottom of the rail will be inserted in the
bottom most square hole.
•
When installing AP1, the square tab at the bottom of the rail will be inserted in the
seventh square hole.
R
AILS FOR
AP0 M
OUNTED IN THE
B
ACK
, L
EFT SIDE OF THE
C
ABINET
(
AS YOU ARE FACING THE FRONT
)
6. At the front of the cabinet, insert the front of the right side rails in the square holes.
7. At the back of the cabinet, pull out the cable bundles for AP0 and AP1. Make sure that the
cable bundle for AP0 is routed under the cables for AP1.
C
ABLE
B
UNDLES FOR
AP0
AND
AP1