Silex technology AP-500AC, Руководство пользователя

Страница: 31 / 218

3. Configuration Using Web Page
25
Check the IP Address of AP-500AC.
The default IP Address can be found on the bottom label of AP-500AC.
AP-500AC
Made in Japan
E/A : XXXXXX&&&&&& S/N : YYYYYYYYY
この製品は、技術基準認証済の無線装置を内蔵しています。
W52/W53は屋内使用限定
Contains : FCC ID N6C-SXPCEGN Contains : IC:4908B-SXPCEGN
Contains : FCC ID N6C-SXPCEAC Contains : IC:4908A-SXPCEAC
IEEE802.11b/g/n
IEEE802.11a/n/ac
W53 W56 W52 J52
R Default
SSID(2.4G):AP-500-&&&&&&-1
SSID(5G) :AP-500-&&&&&&-3
Key :########
PIN :********
Authentic :WPA2-PSK
Encryption:AES
Password : なし (N/A)
IP Address:***.***.***.***
2.
- If AP-500AC was configured for another network in the past and you are not sure what IP
Address has been assigned, reset AP-500AC to factory defaults. For how to initialize AP-
500AC, refer to
Chapter 5-11 Maintenance Feature - Factory Default Configuration .
Note
1.
Connect the PC (to use for setup) and Ethernet Hub using a network cable.
Network Cable
Ethernet HUB
PC