Silex technology AP-500AC, Руководство пользователя

Страница: 170 / 218

164
AP-500AC User's Guide
2.
Press and hold the push switch (SW2) on AP-500AC while inserting the AC plug back
into the electrical outlet. Release the push switch in 2 sec or more after the Link LED
and Status LED turned on.
(4)
(3)
(2)
(1)
Check 2 sec is over
after these LEDs turn on
Outlet
Push Switch (SW2)
Push and hold
Turn on
Release
Factory Default Configuration
1.
Unplug the AC adaptor of AP-500AC from the outlet.
How to reset AP-500AC to factory defaults using the Push Switch:
3.
When the factory default configuration is completed, AP-500AC is restarted
automatically. When ACTIVE LED starts blinking in Green and then turns to Green,
restart is completed.
- When receiving power over the Ethernet (PoE), unplug the network cable from the HUB.
Note
- When receiving power over the Ethernet (PoE), press and hold the push switch (SET1) on AP-500AC while
inserting the network cable back into the HUB.
Note