Silex technology AP-500AC, Руководство пользователя

Страница: 122 / 218

116
AP-500AC User's Guide
- After the VLAN feature is enabled, you will not be able to configure AP-500AC via the network with a
different VLAN ID from management VLAN ID. If you are not sure of the VLAN ID of the management
VLAN, you will need to initialize the settings and reconfigure AP-500AC. For how to initialize AP-500AC,
refer to
Chapter 5-11 Maintenance Feature
-
How to reset AP-500AC to factory defaults using the
Push Switch .
- To configure AP-500AC wirelessly from a PC running on VLAN-enabled environment, the VLAN ID
configured to SSID of the wireless LAN must be the same as management VLAN ID. By defaults, the
configuration change via wireless LAN is restricted on AP-500AC since the
Access Control
feature is on.
Please change the setting appropriate for your environment.
- For details on each configuration item, refer to
A. Appendix
-
A-1. List of All Settings
.
TIP
The VLAN configuration is completed.
The virtual network groups will be active based on the VLAN ID setting you configured.
VLAN ID
：
1
Group A Group C
Group B
SSID
：
MARKETING
VLAN ID ： 200
SSID
：
SALES
VLAN ID
：
100
SSID
：
GUEST
VLAN HUB
Establish the Virtual Network Groups
AP-500AC