Silex technology AP-500AC, Руководство пользователя

Страница: 198 / 218

192
AP-500AC User's Guide
Wireless LAN Configuration (5GHz) - Wireless LAN Common Configuration
Ext Channel
General Configuration
*
Detail Configuration
*
Details Set the extended channel when 40MHz is selected for channel bandwidth.
Available extended channels will differ depending on the channel.
Range 36/40/44/48/52/56/60/64/100/104/108/112/116/120/124/128/132/136/140/
Default Value Depending on the channel
DFS Primary Channel
General Configuration
-
Detail Configuration
*
Details Set the alternative channel used when radar signals are detected during DFS channels are used.
If the alternative channel is not specified or radar signal is detected even for that channel, the channel
is switched in a certain regulated order. For details on DFS channel switch, refer to
2-6. Wireless
Interference Information - DFS .
Range NONE/52/56/60/64/
100/104/108/112/116/120/124/128/132/136/140
Default Value None
Note When DFS is running on all of channels, AP-500AC will switch the channel in approximately 30 min,
from the one specified previously to the other. While the channel switch is in process, 5GHz LED (Red)
will turn on.
Wireless LAN Configuration (5GHz) - Wireless LAN Basic Configuration 3/4
Interface
General Configuration
*
Detail Configuration
*
Details Enable/Disable the wireless LAN interface 3-4.
Range ENABLE/DISABLE
Default Value Wireless LAN3: ENABLE, Wireless LAN4: DISABLE
SSID
General Configuration
*
Detail Configuration
*
Details Set the SSID of the wireless network.
The SSID is an ID that distinguishes a wireless LAN network from others. For wireless devices to
communicate with each other on a wireless network, they must share the same SSID.
Range Up to 32 characters
Default Value Wireless LAN3: AP-500-xxxxxx-3
Wireless LAN4: AP-500-xxxxxx-4
(
xxxxxx
is the last 6 digits of the Ethernet Address)
Stealth Mode
General Configuration
*
Detail Configuration
*
Details Enable/Disable the Stealth Mode.
Range ENABLE/DISABLE
Default Value DISABLE
Note If the Stealth Mode is enabled, the Smart Wireless Setup feature can no longer be used.