Operating manual
Twister II NA
Copyright Silca S.p.A. 2015
15
7.4
CUTTING NARROW-BLADE LASER (SIDEWINDER) TYPE KEYS
(ART.HU41P-HU55P- HU64P...)
The clamp can also be used to cut narrow-stemmed Laser (sidewinder) keys but requires the use of the optional
adapter. Proceed as follows:
1) Open the clamps by loosening knobs (E) and (E1).
2) Insert the adapters into the clamps.
3) Insert and gauge the pattern key (as described in section 7.3).
4) Secure the adapter and key by tightening knob (E) and (E1).
Fig. 16
7.5 CUTTING KEYS FOR FICHET
The clamp can also be used to cut keys for FICHET (H pro
fi
le). Proceed as follows:
-
open the clamps slightly by loosening knobs (E) and (E1) (Fig. 6 on page 7).
-
place the keys with the stop up against the clamp.
-
secure the keys by tightening knobs (E) and (E1).
Cutting:
turn on switch (Q), lower the collet assembly and position on the beginning of the cut.
• secure the spindle at this height.
• carry out the cuts using only lever (C).
Fig. 17
Содержание Twister II NA
Страница 1: ...Twister II NA Operating Manual Original Instructions D445453XA vers 1 0 EN...
Страница 4: ......